VM95 Series dual magnet cartridge with 0.6 mil conical stylus
This VM95 Series cartridge with 0.6 mil conical stylus fits half-inch mount turntables. The cartridge’s special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement stylus.
Every cartridge diamond stylus becomes worn after a period of play.
Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.
The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
Aluminium Cantilever Conical stylus Bonded Round Shank
- VM95 Series dual magnet cartridge with 0.6 mil conical stylus
- Aluminium cantilever
- Specially wound coils increase output voltage
- Durable low-resonance polymer housing
- Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
- Compatible with any AT-VMN95 replacement stylus
requency Response 20-20,000 Hz Channel Separation 18 (dB at 1 kHz) Vertical Tracking Force 1.8-2.2g (2.0g standard) Stylus Construction Bonded round shank Recommended Load Impedance 47,000 ohms Output 4.0 mV (1 kHz, 5 cm/sec.) Channel Balance 2.5 dB (1 kHz) Stylus Shape Stylus Shape Cantilever Aluminium pipe Mount Half-inch Replacement Stylus AT-VMN95C Coil Impedance 3.3 k ohms (1 kHz) DC Resistance 485 ohms Load Capacitance 100 to 200 pF Coil Inductance 550 mH (1 kHz) Vertical Tracking Angle 23° Dimensions 17.2mm H × 18.9mm W × 28.3mm D Weight 6.1 g Accessories Included Two 11mm installation screws, two 8mm installation screws, two washers